question

vanwoenm avatar image
vanwoenm asked

Smart solar charger stuck in bootloader after update v1.61

Configuration: Multiplus 5KVA + Batt_LG48V9.8kWHr + GX + 2 x SmartSolar MMPT 250/85

After update of both chargers to v1.61 (latest version) both charger are stuck in bootloader!

Power cycling doesn't help. Chargers LEDs orange and green are blinking fast alternatively.

Since it is in bootloader mode Victron-connect is not able to update.
Is there a way to revert to previous installed version or reset MMPT to factory settings?

thank you,

Michel

mmpt
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
vanwoenm avatar image
vanwoenm answered ·

Just to notify that this issue has been solved!

It went wrong when I ran Victron-connect on Android phone and attempt to upgrade.

Has been solved when I ran Victron-connect on iPhone, just connect and do upgrade to latest v1.61

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic