This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Scenario - van is getting an upgrade to a lithium battery system. Previously had a CTEK charger connected to (AGM) battery that charged it when the van was connected to mains power. Running a SmartSolar MPPT 100/20 and a RPi Venus.
Current charger doesn't do lithium chemistries. I can buy a new one (~$190) but I can buy a 48v 300W PSU for a lot, lot less and wire it with a relay so it takes the place of the panel when there is mains power.
Any thoughts why this isn't a good idea?
I assume you are trying to find a cheaper way to have three stage/controlled charging here.
Since the mppt will try track, it may cause issues since the PSU has constant voltage.
The second one would be if the mppt tries to protect the battery by shorting the PV input you may have a dead PSU.
Will it work, probably yes. Will it be trouble free, no.
It would be better to have the PSU directly connected to the battery itself. But you still wont have 3 stage charging. I guess not totally important for lithium set the bulk voltage. CV CC.
The second one would be if the mppt tries to protect the battery by shorting the PV input you may have a dead PSU
Is this really a thing the SmartSolar does? Not a disconnect? Would sure be an issue on some systems having the panels in full sun driving just their wiring!
