This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, I would be interested to know if you can log the control behavior or the down control of the Multiplus in the event of overload somewhere. I have 3 Multiplus 48/5000 + 4x MPPT 250/85. 10KWP each comes from the east/west roof. My concern is whether it might be worth buying another Multiplus. Best regards Marco
You will get the overload warnings in VRM (these are quite a way from an actual overload event though)
is that what your after? you could also set yourself up something more granular with a local grafana setup
