question

nir-fsight avatar image
nir-fsight asked

Send commands to Multi Plus (via CCGX) over API

Hi,

Is there a way to use the SSH (or any other method) to send commands remotly to the CCGX (to set working points of Multi plus), instead of using MQTT / Modbus?

Thanks

Nir

Multiplus-IICCGX Color Control
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
pauldeg avatar image
pauldeg answered ·

@nir_fsight did you have any luck with this?


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

johanndo avatar image
johanndo answered ·

You could use the MK3 ve.bus HEX protocol used to configure and manage the inverters via ssh. If the things you want to change work already in VenusOS via the gui, you could directly read/write the dbus and let the victron drivers do their magic on the Quattro.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.