This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
We are using a phoenix 12/250 sinewave inverter in small stand alone system. The earth terminal of the inverter and earth from the output are linked.
What would happen if the active wire from the output accidentally shorts to the earth?
Will the inverter shut down and protect itself?
Could this scenario become a danger for the users?
I couldn't find any questions related to this topic, but apologies if this question has already been asked.
Thanks,
Hus
In the USA, a GFCI or circuit breaker would trip.
Assuming no one is standing with their finger on the earth terminal at the back all should be fine. And no one is playing with live wiring.
The inverters are short circuit proof. See the manual is is a feature.
I have seen one shut down rather gracefully when the user rolled over their extension chord (plugged into a 12/500) and damaged it so there was an internal short there.
Thanks for the response @Alexandra.
We are considering the worst-case scenario: if someone is in contact with the earth (not directly to the earth terminal but to the general earth, where the terminal would be connected anyway) and if the active wire from the output accidentally shorted it.
My understanding is that the inverter should shut down whether there is an active-to-earth short circuit or active-to-neutral. Would I be correct in this?
I also believe that if the active was to short to earth and if the resistance is low enough (assuming the inverter doesn't shut down fast enough or at all), it shouldn't affect a user because the path to the earth would be much easier. What's your opinion?
Thanks again for taking the time to respond to my query.
Hus
