Please have a look at the pic. What is going on here?
asked
MPPT is actually idle but says bulk or absorption?!
I'll start with a silly question first.
Is the charger enabled? Check Settings - > Battery -> then there is a switch to enable or disable the charger.
Yep. Two completely separate systems doing this. Didn't touch them for a few days. No energy consumption either.
When I turn them off the LEDs don't say bulk or absorption. They were floating for about a week. Now I was shocked they were in bulk because there was no energy consumed in the mean time and I just walked past the chargers at noon expecting the usual float indication.
More shocked when I saw that the LEDs lied and the batteries are just idle. Due to my load config now the load was off even with idle solar cells. That was definitely not intended.
disconnected from the battery for a short while the behaviour seems okay again...!?
Nobody an idea? Two chargers next to each other but completely separate systems doing the same. Today they were both fine.
No more ideas from me. Most strange for two to do the same. There is some common entity that is playing a part here, but no idea what it could be without more knowledge of your system setup.
