This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi every one,
I need help in finding a schematic plan for a quattro 48v 5000 230 inverter with generator , shore line and 48v battery storage system along with dropper to 12v-24v along with the usual Victron high end monitoring system .this will be fitted in a large habitation box on the back of a 24v 18T 4X4 lorry - truck
kind regards Lenny
Did you review the System Schematic diagrams that are available on this website? Did you contact your local dealer for design help?
HI MVAS
NO I HAVE NOT AS I AM NOT SHURE WERE TO FIND THEM ?. I DID HAVE A LOOK BUT CAME UP BLANK .MY PLAN IS TO USE THE QUATTRO 48V 5000VA 70AMP ,WITH A ,MPPT 250 70AMP WITH 3 PYLION US500 4.8KW BATTERYS AND 4 MYER-BURGER SOLA PANELS 385W =1,540W ON THE BOX ROOF. ALONG WITH THESE OTHER ITEMS, Ekrano GX, Cerbo GX, GlobalLink 520, Lynx Distributor, I WAS HOPING TO DROP THE VOTAGE DOWN FROM 48V TO 12 AND 48V DOWN TO 24 USING THE Orion-Tr IP43 48/24V-16A 380W DC-DC Converter AND THE Orion-Tr IP43 48/12V-30A 360W DC-DC Converter. SO WE CAN THEN RUN 24V ITEMS AND 12V AS WELL AS THE 25Ov OVEN AND WASHER DRYER AND 2 RING INDUCTION HOB. NOT ALL RUNING AT ONCE
CAN YOU BE OF HELP PLEASE OR POINT ME IN THE RIGHT DIRECTION .
KIND REGARDS LENNY
Here you can find many different schematics:
https://www.victronenergy.com/support-and-downloads/systems
Otherwise you should ask your local Victron dealer/installer.
thank you Mathais i have had a look but cannot find the plan for the quattro 48v with the other items attached
