Only 2 mppt chargers, an inverter and a smart shunt are connected to CerboGx, where do I connect the third mppt charger. Also, the graph on the dashboard does not show the electricity consumption.
asked
the graph on the dashboard does not show the electricity consumption.
@uguraladag
How have you connected the mppts you have already? Ve direct or can? Are they capable of can connection?
What i verter do you have? If it is a victron is it connected to the ve bus port? Just double check it is in the correct one, it is a common error to out it in the wrong one.
I Have;
two 100/30 MPPT Smart Solars, one 75/15 Smart Solar, one Smart Shunt, and one Phonex 12/1200 inverter in the system. One 100/30 MPPT and another 100/30 MPPT are connected to the three VE-Direct inputs of the Cerbo GX. The Phonex 12/1200 and one Smart Shunt are also connected. One Smart Solar 100/30 MPPT is connected to the USB input of the Cerbo GX. I was unable to connect the Smart Solar 75/15 MPPT charger to the Cerbo GX. You can check the name of the system from the ALPAGOT server.
Although I can see the AC consumption figures on the Dashboard, the AC consumption value does not show on the graph. Why is this? Do you have any suggestions? I would appreciate it.
Here are some possible reasons why the AC consumption value is not showing on the graph:
https://vrm.victronenergy.com/installation/294514/share/c977ba52
