This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
i was just wondering about the multiple controller update and when it will come out and if it will have support for the 100/50 controllers. I'm about to invest in some 325w solar panels to replace my older 200w solar panels and want to hook up both at the same time
How many panels will you have in total?
I'm planning on 6x325w panels on one controller. and my current 5x200w panels on my other controller
hi Bryce. I'm not sure which particular feature(s) you're awaiting, but there must be many thousands of paralleled Victron mppt systems successfully operating already.
Don't let it (whatever it is) hold you back. By all means monitor performance and adjust to suit, but I doubt you'll see anything of concern arise.
i saw a post a few weeks ago where the Victron team commented that they were working on an automatic multi-controller update where you just tie them together in the software and everything after that is automatic they both work together and act as a single controller.
Hi. I am planning two 100/15 Smartsolars in parallel with 2 panels (185 each) on one side and 1 panel (185 W) on the other. The discussion about synching or the fact that there are many operating today in || seems unresolved and there seems to be a software update coming to resolve issues.
So: will 2 Smartsolars work nicely together today and provide benefit over one large - say 100/30 ?
I can't seem to find any wiring diagrams to show this - I assume the Battery Outs simply go together but what about the Load outs - are they too shorted together?
