This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,
I have the system of 1unit of MPPT 150/100 with 3 sets of Lead Acid Battery (150AH) in connected in parallel for 450AH to supply to the load, 8A-15A.
The battery specification mentions the maximum charging current at 30A.
So what "Max Charger Current" value shall be set?
a. Setting 90A as from 3 sets of batteries in parallel --> 3x30A = 90A
b. Setting 100A (Max) as from 3 sets of battery in parallel Plus load
If not as above, please help to advise.
Have you overpaneled the mppt?
How likely is it to stay pinned at 100A?
If not leave it at 100A, dont limit it.
Do you have a shunt?
A shunt would measure the actual Charging amps vs MPPT amps output.
If the manufacture states ... 30 amps max charge rate, then follow their rule. Unless you know more about charging their batteries than than they do. Electrical Engineers always design within a safety margin, we do not take unnecessary risks.
Do you have a diagram of how those 3 batteries are connected in parallel? There is a correct way and many wrong ways.
Mfr and model # of battery or URL?
