question

ras avatar image
ras asked

Values on CCGX display turn off and on constantly?

I have a MultiPlus 48/3000/35 with a BlueSolar Charger MPPT 150/70. Just upgraded to Pylontech US2000B Lithium batteries. As soon as I switch on the inverter, the values on the CCGX display start turning on and off every 2 seconds.

MPPT ControllersCCGX Color Controlcharger
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi Ras,

Please confirm that your system meets the minimum firmware requirements here:

https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom

Specifically the Inverter/Charger.

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ras avatar image ras commented ·

Thanks for the response, Guy.

Looks like all the devices are compatible and I updated all the possible firmware through the VRM Portal, but I understand from questions and answers on the community that I can not update the MultiPlus from the internet. Everything is working fine except for the display icons constantly flickering (or rather turning off and on). Do you think I can use it like this for a while until I can find a way to have the firmware updated?

0 Likes 0 ·
charger.png (8.3 KiB)
multi.png (10.5 KiB)

Related Resources