question

Diriye Amey avatar image
Diriye Amey asked

GX Cerbo Update V3.01 Lost BMS Connection

Hello,

Yesterday I upgraded my gx to version 3.01, from there I no longer see my BMS v2 either in the cerbo display or in the device list on the VRM, I tried rebooting but nothing changed...

cerbo gxBMS
5 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Hi, what do you expect to see or in other words, what is the difference from the previous Venus firmware version?

0 Likes 0 ·
Diriye Amey avatar image Diriye Amey Stefanie (Victron Energy Staff) ♦♦ commented ·
I expect to see in the gx system the bms and in the vrm, also as seen in the attached image the bms does not have system control, which in version 3 worked...
Greetings
0 Likes 0 ·
Show more comments
Juraj Nikolov avatar image Juraj Nikolov commented ·

@Diriye Amey can you ping your GX ? From your LAN ???

0 Likes 0 ·
Diriye Amey avatar image Diriye Amey Juraj Nikolov commented ·
Is connected over wifi and not by lan
0 Likes 0 ·
1 Answer
Diriye Amey avatar image
Diriye Amey answered ·

screenshot-2023-07-19-06-26-20-755-nlvictronenergy.jpg

As you see in the image below

, Control bms is off, before the update it was on.


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.