replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

henrikgaul asked Jul 17, '23

MK2 Interface LED command

Hello,

have somebody a discription of the LED status command of the MK2/MK3 interface configurated as a threephase system with Multiplus II. The document of the MK2 protocol is here not clear from my perspective.

Best regards

Henrik

Multiplus-II mk2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space