I've an off grid system using 2 parallel 3kw multis (4xx recent firmware), a CCGX, BMV-700. These are running from batteries, and a DC solar setup.
I also have ac coupled inverters - a 3kw turbine running through an Aurora GTI, connected to AC Out, and another 4kw GTI running from a second solar array, also on AC out.
Until now I have displayed output from the turbine using an AC Current sensor, connected to one of the multis, which displays as 'PV Inverter' in my CCGX display.
I've added the second GTI, and am measuring it using an Energy Meter ET112, set up as PV Inverter in the CCGX.
My question is - can I get both of these to display similtaneously on my CCGX screen, and is there any way to alter the name that is displayed? (I realise I can alter the device name of the ET112, but it doesn't display this name). If I exchange the Current Sensor for a second energy meter, will that have any effect on the ability to display both? I should add that both seem to be working fine, it is merely a question of displaying the information in both CCGX and on the VRM.