question

mikebamber avatar image
mikebamber asked

Do I *NEED* a VEconfig USB cable?

I'm trying to enable the external CT on my new MultiPlus ii and everything seems to point towards needing VeConfigure. I have a Cerbo GX running and everything connects via VRM / victron connect. Is there a way I can use VeConnect or at least enable the current sensor?


many thanks

sensor
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
nickdb avatar image
nickdb answered ·

You can pull your config remotely off VRM via the GX, modify it with VEconfigure, then push it back remotely. If you want to use VC app you will need the adapter.


2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mikebamber avatar image mikebamber commented ·

Thanks Nick - I just need to enable the sensor.
Any pointers as to how to extract the config?

Thanks

Mike

0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic