question

bigal avatar image
bigal asked

Two MPPT to CerboGx

On our Yacht we have added a 100/500 controller to our new array (600w) and using the existing smaller MPPT to control a 150W array.

Initially I had a VE Smart network, but now I have VeDirect cables connecting both controllers to the CerboGX.

Do I need to do any configuration in the Cerbo GX to set this up for best efficiency?

Do I need to delete the VeSmart network?

MPPT Controllerscerbo gx
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
nickdb avatar image
nickdb answered ·

It's a good idea to remove the smart network to avoid conflicts. Depending on your setup, you can look at enabling DVCC for coordinating charging.

(the cerbo guide has a good section on this)

4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bigal avatar image bigal commented ·
Someone somewhere else said DVCC is really only for Lithium. True/False? (We are AGM).
0 Likes 0 ·
Show more comments