Hello, I am having a display issue. No pv showing on colour control gx from easysolar2. 
ve direct and ve can connected, display on easysolar shows pv and app has all functions. How did i get ccgx to display pv? Thanks
asked
No solar pv display on colour control gx from easysolar 2
The ES-II has a build-in GX device.
The VE.Can and VE.direct port are inputs not outputs.
The MPPT inside the ES-II is internally connected to the GX module.
If you want to use the CCGX you have to open the ES-II and connect the VE.drect cable to the MPPT and disconnect the internal VE.direct, VE.Bus and power connection to the GX module.
Or you just use the GX module of the ES-II and remove the CCGX from the system.
Thanks matthias, can you explain how I would identify and disconnect the ve direct, ve bus and power supply to the gx module.
Also, should the remote switch cable be disconnected?
