This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,
I would like to activate "Disable Feed In" using NodeRED. A few seconds after DFI is set to "1", it will return to "0" by itself. It's the same with "Switch Position", about a minute after setting "2 Inverter only", it will automatically return to "3 On".
ESS mode is 2. Is it nacessary mode 3?
I would like to turn off Feed In automaticaly for nights.
Thanks.
This basic flow works for me, an ESS node and an ESS Control node. Venus settings > Feed excess DC-Coupled PV into grid on both.
Hi it sounds like you had the same issue as me. By default AUX1 on the multiplus control whether feed-in is disabled or not. Even if you change the setting in node-RED the aux input on the multiplus will override it.
You either need to disconnect AUX1 in VEconfigure or use AUX1 to disable feed-in, eg. By connecting one of the relays from the Cerbo GX.
