question

johnjaymack avatar image
johnjaymack asked

Node Red information on actual inverter inverting power

In Node Red, the VE Bus System has selections for Input Power and Output Power. Is there a selection that show just the power of the Inverter when Inverting? In addition to the VE Bus System module I have looked in the System module, but I have not been able to identify a reading that is just the Inverting power output. Can anyone suggest how to monitor just the Inverting Power?

powerassist
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
derrick thomas avatar image
derrick thomas answered ·

You might take a look at the dbus. If what you are looking for is there you can use mqtt to incorporate that information into your node red flow.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic