question

edwardsa avatar image
edwardsa asked

Vregs 0x370 and 0x371

Hi,

I have a Lynx BMS and I'm trying to communicate via CANbus to the device. I found the SOC value transmitted on the bus in PGN 0xEFFF and Vreg 0xFFF. I also saw several other Vregs 0x120, 0x201, 0xFFE, etc. coming across the bus but not 0x370 or 0x371 which I am interested in since I want to remotely monitor the state of the system.

I tried starting and stopping the unit and putting it on standby to see if the point would appear on change but had no luck.

Any advice would be appreciated

Thanks,

Anna

VE.CanNMEA 2000 - N2Klynx bms
1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

safiery avatar image safiery commented ·
We are also interested. Did you find more information on this? Bruce
0 Likes 0 ·
0 Answers

Related Resources

Additional resources still need to be added for this topic

LED indications, warnings, alarm and error codes

Lynx Smart BMS product page

Lynx Smart BMS online manual

Additional resources still need to be added for this topic