I've successfully connected and I am as of writting this, charging the 48v battery bank using the following generator:
HONDA EU30is MAX KVA 3,0 (13,6 Amp.) Regular KVA 2,8 (7,2 Amp)
Using the VE Configure application in the CHARGER tab:
- I have disabled Weak AC input
- Selected GEL/AGM battery type
- SET CHARGE CURRENT TO 13 A. here is my question.
Can I set this CHARGER CURRENT setting to a higher value than the provided by the generator? The gen Max Amps is 13A, Can the Quattro charge the batteries to lets say 25A?
Now If you see the picture I am not sure why the voltage is not higher than 50V as specified in the settings.
any suggestions?