Hi, my Mppt charge controller has been working fine and now the state is off during the day. I’ve checked all the connections, fuses, etc, all good. I’ve reset the controller, but no luck. Any help would be much appreciated. Thanks in advance.
asked
Mppt charge controller state off during the day
Hi @Saltysails
Did you know that you can press the "Why is the charger off" text and then you get an explanation on why the charger is off?
Asking because we see this question quite a lot on the community and this functionality was added specifically for these cases. But if people do not know it / find it, then apparently it is not clear.
Kind regards,
Thiemo van Engelen
Pv voltage is lower than battery voltage. Check the voltage coming into the MPPT with a meter and see if it agrees with the app. If so then you have a connection problem somewhere between the panels and the MPPT. If not, then try resetting the MPPT. Disconnect pv first, then battery. Leave for 5 minutes the reconnect in the reverse order.
Thank you Derrick Thomas, I followed your reset instructions and now it works again! This problem is solved.
Mine is off also but being non technical in this unsure what the problem is. 
