Hi,
Quick question about accessing the settings on the EV charge station. I see that the extent of settings available varies depending on whether I use VRM/GX, VictronConnect/Bluetooth or local web-interface, with the latter providing the only means to access all settings. Does this mean that in order to be able to access the full settings remotely, I need to set up port forward etc. etc. to the local address - or is there something I'm missing here to get to those settings remotely?
Also - while I'm posting, I think the mode settings for auto and scheduled would benefit from some revisions. My use case is fairly common in that I want the charger to sit in auto to benefit from excess solar gen during the day, but then to always run a scheduled charge in off-peak rates overnight. At the moment, this requires an intervention to change the mode at the end of the day to 'scheduled' and back to auto again in the morning. In fairness, this was fairly easily remedied with a node-red flow, but it would preferable to have it handled in basic settings. The 'prioritization' of schedules is how other such chargers (MyEnergi Zappi for instance) work.
Thanks
John
