question

jeroen-kuijf avatar image
jeroen-kuijf asked

Is it possible to connect the VE.net bat controller through VE:NET BPP to CCGX with the VE.BUS and read the battery status from the bat controller on the CCGX?

VE.Net
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Martijn Coster (Victron Energy Staff) avatar image
Martijn Coster (Victron Energy Staff) answered ·

@Jeroen Kuijf

No this is not possible

best regards
Martijn Coster - Victron Energy

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jeroen-kuijf avatar image
jeroen-kuijf answered ·

Thanks Martijn ,

I tested it already and the ccgx does not reconize the bpp , thats a pitty , because the bat controller is really bomb-proof.

So now the bpp and the bat controller are working on their own on a 1000A shunt , besides the ccgx with 2 bmv702´s (500A shunts) and 2 quattro´s 8000/200.

rgrds , Jeroen.

P.s. Check vrm world , North Portugal , site , www.quintacasadafonte.com (is my installation name and farm) , you can see/read very nice ideas to boost the installations performance.

This week I will install also the ET340 to show the solar power.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic