question

dgmeier avatar image
dgmeier asked

Smart BMS 12/200 "system port" control

How can I configure the BMS 12/200 system port so current flows out only ? (Does not allow current into the BMS. I planned to use the Battery Protect device however it states, " Reverse currents from OUT to IN terminals are strictly forbidden and will damage the device. " My issue im trying to prevent lead acid batteries in my "DC load " circuit to be drained by the lithium.

BMSlead-acidsmart lithium
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources

Additional resources still need to be added for this topic

Victron VE.Bus BMS product page

Victron 3rd party BMS compatibility page