Hello,
I made approx. twenty PV installations based on Victron products and it is a great solution with many possibilities due to open system, Cerbo GX with MQTT, Node-RED etc.
I already made some features using Node-RED for blocking grid feed-in based on signal from grid operator, based on actual energy price and some others, and now I made simple dashboard for basic users (without full access) with simple system settings - e.g. grid feed-in mode, set minimal energy price allowing feed-in to grid, set minimal battery SOC in ESS,...
Problem is that only possible access to Node-RED dashboard is via device connected to local network and knowledge of Cerbo GX actual IP address. The address does not have to be fixed, and many customers does not know, what is the IP address of the device in network... The best and simple solution would be access to Node-RED dashboard (and only dashboard) via VRM, where end-user can make some simple but useful setting of the system without needing full access permissions.
Is it something, which is possible or planned in near future?
