question

paulhowes avatar image
paulhowes asked

Mopeka temperature display on cerbo display

Hi, long time reader, first time posting.

I have a raspberry pi 3b+ running as a cerbo in our motorhome. Works faultlessly. I recently added mopeka tank level sensors to the fresh and grey water tanks.

Question, is there a way to display the temperature from the mopeka sensors on display, vrm and remote console. It would be great to use the sensor temperature reading as an outside temp, considering being in the shade under the van.

Feedback much appreciated

Temperature Sensorsensor
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

5 Answers
hiddentty avatar image
hiddentty answered ·

Exact same here !
I've also done a post on Reddit on r/Victron about this.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

paulhowes avatar image
paulhowes answered ·

I've just seen that. I too have gui mods but it will not display the temperature of the mopeka sensor

This is surely an easy piece of data to display

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jjbond avatar image
jjbond answered ·

Mine all show up... all these in red are Ruvvi tags.... and yes, they do all appear on the actual physical display panel, I just went and checked. LOL

Jen

2023-06-13-21-49-11.png

2023-06-13-21-50-11.png

2023-06-13-21-51-48.png

2023-06-13-21-50-52.png

2023-06-13-21-51-48.png



2023-06-13-21-51-48.png (149.3 KiB)
2023-06-13-21-49-11.png (188.0 KiB)
2023-06-13-21-50-11.png (138.3 KiB)
2023-06-13-21-50-52.png (130.2 KiB)
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

derrick thomas avatar image derrick thomas commented ·
OP was about mopeka sensors, not ruuvi.
1 Like 1 ·
Show more comments
jjbond avatar image
jjbond answered ·

https://www.youtube.com/watch?v=kp--eaQj5jU


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mitchme avatar image
mitchme answered ·

Still open?

I would love to see the temperature of my Mopeka Sensors in VRM and my display.

In the remote console, I can see it.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron temperature sensor disambiguation table - which product supports which sensor


Additional resources still need to be added for this topic