I have 4 BMV's and 3 of 100ah Smart Lithium batteries that show up in the Victron Connect App. As well, when I drill down to see the status of the Globallink 520 they show as devices connected to the GL520. It indicates that 7 devices are connected to the GL520 and drilling further down it shows the 4 BMV's and the 3 Smart Lithium batteries as connected. All 7 have the toggle turned on for the Globallink 520 to include them in VRM, however only the 4 BMV's actually show up in VRM app in the device list (along with two GL520 digital outputs and the GL520 it self as devices). The 3 Smart Lithium batteries are not available as devices in VRM. The same is true when viewing VRM through a browser.
How can I get the Smart Lithium Batteries to show up as devices in VRM?
Note that the instant read out data from these batteries does show up in the Local tab of Victron Connect, so the battery data is being "advertised" by the batteries. As well I should point out that all devices are Bluetooth only; I am not using any wired VE.Direct connections to the GL520
