question

wcat avatar image
wcat asked

AES mode L1 output voltage (modified) 75 volts

Is this normal? Shouldn't I be seeing 120 volts on the output when AES is active? Will 75 volt cause issues with low powered AC devices? Thank you.1685967339918.png

aes
1685967339918.png (256.8 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
wcat avatar image
wcat answered ·

Bump, no one has any input on this? Guess I won't be using AES.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image
kevgermany answered ·

AES should revert to full voltage once an adequate load is applied, probably at or around 30W.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic