Issue is related to ModbusTCP connection from CerboGX to SolarEdge.
I have used SolarEdge ModbusTCP over LAN, in my local management system integration, to read various PM data from SolarEdge.
Now I have got Victron MultiPlus with CerboGX and its "/opt/victronenergy/dbus-fronius/dbus-fronius" is constantly connected to my two SolarEdges inverters through modbus sunspec as well. It works perfectly well.
Problem is SolarEdge allows only one concurrent connection through modbus-tcp. I have reconfigured my local management system to read data from what Victron dbus and mosquito broker (mqtt) can output on pvinverters topic of 20 and 21, what corresponds to both SolarEdge inverters.
Unfortunately Victron reads only basic inverter modbus data without meters import/export power and energy. According to SolarEdge meters data are bit further from 40000 modbus address:
1st meter: 40000 + 121, 2nd meter: 40000+295, 3rd meter: 40000+496
Were you able somehow to force Victron cerbo to read SolarEdge meter data as well through modbus? Any help/hint would be very much appreciated.
BR,
Mariusz