Multiplus-II 48/10000
CCGX Running Venus 3.0
2x 150/70 MPPT,S
Generator on AC input 1
When the generator is running the icon on the display of the GX shows the generator icon, but the moving graphics that show voltage flow don't display from the generator icon to the Multiplus-II icon & when in the Multiplus-II menu the AC input shows voltage & frequency but no watts or amps, although it's charging the battery and supplying the loads ok. Also when in Generator mode the Multiplus-II AC output voltage graphic does not show either. The only graphics that are moving when in Generator mode are the ones from the Multiplus-II to the battery and from the mppt to the battery.
Any ideas?