This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
What is the minimum input current limit for Quattro?
Setting it on VEconfigure allows me to set it as low as I want. However, the input current limit won't go below 10.5 on the Colour Control.
It needs to be set lower as the customer only has a small generator. How do I do this?
Hi Mick,
The minimum AC input current limits vary depending on the device, they are described in this article:
The definitive source for these AC input Power assist minimum current limits is here, you will need a Victron Professional account to access them.
If you wish to go lower than that, you must disable the PowerAssist feature.
It would also be a good idea for you to check out this MultiPlus Generator FAQ, if you haven't already.
https://www.victronenergy.com/live/multiplus_faq
Guy, Can Victron update the minimum current limits spreadsheet to include the multiplus 2 data? Is it the same as the original multiplus?
Hi,
this doesn’t explain why CCGX only lets you set a limit below a certain number (15.5 in my case) when inverting.
Hi Guy,
I have a use case to dynamically limit the input current of a MultiPlus-II. Are there any concerns frequently updating this input limit current or can I update that limit to my hearts content?
Or to rephrase the question: am I wearing out internal (flash) memory in the Multi by repeatedly updating the input current limit?
My use case is an installation with two independent power systems (off grid) where the second system can assist the first system depending on the SOC of it's battery and the excess solar energy available there.
cheers,
Jan
