For setting up solar charging for boat only after use when its done for the day. Would it be required to have bmv for SOC or does that mainly help with charging and discharging at the same time? The solar setup is on the boat shed not on the boat.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
For setting up solar charging for boat only after use when its done for the day. Would it be required to have bmv for SOC or does that mainly help with charging and discharging at the same time? The solar setup is on the boat shed not on the boat.
Hi BT. Welcome.
SOC is one of those things you might either love, hate, distrust, don't care, or be misdirected by.
It's a calculated figure, and in your case likely totally irrelevant to controlling your charge needs. To have it you'd need a BMV well-tuned onboard.
With Li or exotic batts there may be value, but if just Pb's it's really just an 'extra' for the geekish. :)
Popped in to say that I went through all of those feelings for SOC!
Unless you've got a particular use case in mind, I'm not sure whether you absolutely need to measure the SOC. The charger will work irrespective of whether you have a BMV or not - if the charger is dialled in correctly, it doesn't need a BMV to tell it that the battery is full.
Thank you that was helpful I figured solar chargers would correctly charge batteries maybe based on age assuming they aren't too damaged. Does the BMV combined with BlueSolar charger allow for discharge and charging at the same time more efficiently for something like a camper? If you are using 20 amps (through BMV shunt) will the solar charger base its charging rate on voltage or SOC?
Victron BMV battery monitors product page
Additional resources still need to be added for this topic
11 People are following this question.