Configuration has two Multiplus 24/3000/75 in parallel supplied by shore power or Fischer Panda generator. Running with generator charging the 600Ah batteries system via the Multis works OK with no temperature light on. After switching Gen off then if in error left on red temperature light flashes for a few minutes. Light does not flash if inverter used on high load if have not been charging. Light never goes to solid red.
I know red light flashing is documented as high circuit temp but why only flashes when switching Gen off? Not sure if Same error when charging with shore power as in US and only have 60Hz available and Multi version only accepts 50Hz. Multi fans seems to be working fine. Thanks for assistance.
