question

cybert avatar image
cybert asked

Epever 2000w inverter with Venus OS

Hi, did anyone connectes epever inverters to venus. I successfully connected mine to arduino with rs-485 module and it works fine. Is there someone to help me with writing the driver? I have some programing experience.

Venus OSdriverdiy
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
mr-manuel avatar image
mr-manuel answered ·

You could use Venus OS Large with integrated Node-RED and use https://github.com/mr-manuel/venus-os_dbus-mqtt-pv to feed data over MQTT to the dbus.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mr-manuel avatar image
mr-manuel answered ·

By the way, are you using this? https://github.com/chickey/RS485-WiFi-EPEver to read the data from the EPEver?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

cybert avatar image
cybert answered ·

I will definitely try that!! Thanks for the reply.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron Venus OS Open Source intro page

Venus OS GitHub (please do not post to this)

Additional resources still need to be added for this topic