question

jamesw avatar image
jamesw asked

ORION 12/30 setup

Victron cooling fan.jpgI am in the final stages of installing a Orion 12/30 isolated DC2DC charger. I have installed a cooling fan in advance of any potential overheating issues and it's mounted on a 1.6mm steel sheet over plywood in a caravan with good space around it. My question after all that background information is this. After having another brand of charger controlled via an ignition source previously in another camper is the Victron app to control startup/shutdown better OR an ignition switched source to control startup/shutdown? I do have a smart alternator in the tow vehicle, ie variable voltage.

orion dc-dc
victron-cooling-fan.jpg (2.6 MiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Sarah avatar image
Sarah answered ·

hi @JamesW it depends a lot on the type of alternator you have - lots of people, particularly those with smart alternators, have had mixed experiences with the engine detection features of the Orion. I would suggest configuring engine detection first and see how well it works in your environment. You can always add the additional ignition wiring later.

5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jamesw avatar image jamesw commented ·
Sarah, I have a variable voltage (Smart) alternator. I like to be prepared for any scenario if I can.
0 Likes 0 ·
Show more comments

Related Resources

Victron DC to DC Converters Product Range

__________