An existing setup with Multiplus and battery. Only mains to charge the battery. Can one feasibly add a regulator and panel to charge the battery in parallel with the existing set-up?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
An existing setup with Multiplus and battery. Only mains to charge the battery. Can one feasibly add a regulator and panel to charge the battery in parallel with the existing set-up?
@clive87 sure why not.
You will need to make sure that the total charge current from both chargers does not exceed your batteries maximum charge current.
The Victron charges at about 400 (35A x 12) so panel output of no more than say 700 watt to be safe. Two panels of 350 watts each with a regulator to match? Not sure if my calc is right?
Additional resources still need to be added for this topic
33 People are following this question.