I have a 48/5000 GX Multiplus 2 with a Pylontech BMS connected by CAN to LifePo4 batteries. That is all working, the MP2 sees the battery and shows charging state etc on display. Only problem is after adding the ESS assistant with VEconfig for Lifepo4 batteries it does not show ESS assistant in Remote console. It says no assistant found. I uploaded (and downloaded for checking) the settings many times to the MP2, changed to factory settings, updated FW etc etc. All not helping! Result is no charging at all and message on display ESS off.
What am I doing wrong?