This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have onnected 6 panels of 275W with two individual (3 panels in both) MPPT solar charger connected into battery bank of 1200Ah via LYNX IN bushbar. I have bluetooth smartdongle and BVM-700 for adjusting the chargers With my laptop. Shall I but the same values into both MPPT chargers for charging the battery bank right? When I will do the equalization phase for battery bank must I put ON both MPPT chargers simultaneously?
Since you have two charge controllers, I suggest you set them up onto a VE.Smart network (you should own the smartsolars for that to work, of course). That way, the controllers will be in sync, and will act exactly the same way. Settings should be identical, as per the VE.Smart Networking documentation (do a thorough read first).
If he's got the smart networking then what benefit is there going to the vd.direct cable? I only ask because I'm in a bit of a pickle with my installation.,
