question

michele-stramare avatar image
michele-stramare asked

Venus and Axiom+

Dear Victron community,

in my system I have:

2 smart shunt

Smart solar 75/15

Venus Gx

I’d like to connect all instruments to my Axiom+. Now there is a Ethernet cable between Axiom & Venus but the dashboard is empty. Can I add the two smart shut to Venus via Bluetooth ? And then connect the smart solar via Ve.Direct to Venus ?

Thanks in advace

Michele

connection issue
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Peter Buijs - NL avatar image
Peter Buijs - NL answered ·

@michele Hi, did you follow this page about MFD integration?

https://www.victronenergy.com/live/venus-os:mfd-raymarine?_ga=2.54160812.548158401.1683381994-2093702607.1662400342


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

michele-stramare avatar image
michele-stramare answered ·

Hi Peter, Yes I followed the instruction. MDF & Venus are already connected but the dashboard is empty. I can't add any sensor. No data from Smart shunt or Smart solar....

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Peter Buijs - NL avatar image Peter Buijs - NL commented ·

https://community.victronenergy.com/questions/150288/cerbo-gx-and-vesmart-networking.html

You need to connect to Venus GX with VE.Direct or VE.Direct to USB cables.

Bluetooth Smart networking is meant for small installations without a GX device.


0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic