question

jonathanv avatar image
jonathanv asked

Battery Protect for charge protection - what happens if there is a short circuit on the IN side?

When configuring a Battery Protect as a charge control device (as defined in the manual for Lithium setups), the chargers are on the IN side and the battery is on the OUT side.

What would happen if there is a short circuit on the IN side? Would this cause current to flow the wrong direction through the BP, frying it? Or would the short circuit protection normally meant for the OUT side also protect it?

screenshot-2023-05-05-134351.png



Lithium BatteryBattery Protect
screenshot-2023-05-05-134351.png (80.8 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
klim8skeptic avatar image
klim8skeptic answered ·

Fusing as shown in the diagram come into action and pop.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jonathanv avatar image jonathanv commented ·
But those fuses will take some time to pop, they are 60A and 125A fuses on a BP220 in my case. In the meantime there's current going through the wrong direction?
0 Likes 0 ·
Show more comments