question

tronegeden avatar image
tronegeden asked

MPPT 250/70 relay access on EasySolar 2GX

Hello community.

I need cabling the relay on the embedded Solar module (MMPT 250/70) on EasySolar 2 GX.

Did someone already open the "box" for such purpose ?

Thank you for your answer

MPPT ControllersEasySolar All-in-OneRelay
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

There are just a few screws and you can open it.
But be careful there is a ribbon cable from the GX module to the display.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

tronegeden avatar image tronegeden commented ·
Therefore your answer means cabling is possible ? Anyway thank you for your quick (Saturday) response !
0 Likes 0 ·
Matthias Lange - DE avatar image Matthias Lange - DE ♦ tronegeden commented ·
Yes it is possible, I don't see why not.

You just have to find a way for the cable.

0 Likes 0 ·
tronegeden avatar image tronegeden Matthias Lange - DE ♦ commented ·

Thank's very much

0 Likes 0 ·