Newly installed Victron MPPT 150/60...not bluetooth. Used to charge two LIFEPHOS batteries of 300 amps each in parallel. Used in parallel with a Midnite Classic 150. There are 2.25 kilowatts of panels on the Midnite and four 545 watt panels on the Victron.
The Victron cycles perfectly until it reaches float and here it seems to go to sleep on the job. All current that flow from the batteries is negative and there in no input from the Victron to maintain the float voltage. The preset float voltage, according to the manual, is 27 volts. I have seen the batteries drop to 26 volts and still there is no charging shown by the Victron.
A defective Victron MPPT or is there something I'm missing...as always.
Thanks!