question

rudyvoet avatar image
rudyvoet asked

After firmware update nothing works (MPPT 100/20)

This is the only information I receive

img-7195.png

MPPT Controllers
img-7195.png (217.7 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Thiemo van Engelen (Victron Energy staff) avatar image
Thiemo van Engelen (Victron Energy staff) answered ·

Hi @Rudyvoet

This means that the internal bluetooth dongle is no longer able to communicate with the solar charger part of the SmartSolar. What you can try is to power cycle the SmartSolar by disconnecting both PV and battery for 1 minute and then reconnect the battery and PV (in that order).

Kind regards,

Thiemo van Engelen

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

rudyvoet avatar image rudyvoet commented ·
I tried, but no change
0 Likes 0 ·
rudyvoet avatar image rudyvoet rudyvoet commented ·
BUT! Victronconnect now allowed me another update of the firmware! And now it appears to work!! i gave a bleu led and a real information screen. Thanks for the help
0 Likes 0 ·
Show more comments