question

garry13 avatar image
garry13 asked

No solar-charging

My system is installed in a Camper: 4 solarpanels, each 140Wp, one SmartSolar MPPT 150|35 , two SmartLithium 12v|200A batteries, one BMV 712 smart, one Blue Smart IP22 30A charger. One D+-relay connects/disconnects the motor-battery from the Lithium-batteries.

When the engine is running or by using the 220V-Charger, everything works fine: the batteries will be charged.

But as soon as the solarpanels should do the job (the sun is shining) I get something like this:

1683018861203.png

1683019909650.png

These are the settings.

1683019008060.png

The "charge"-led an the BMS 12V | 200A is off. Charging seems to be blocked:

1683019450404.png

I checked the shortcut of the green plug (remote for charging): OK, the red cable has 12V.

I checked the cables between the solarpanels - no findings. Connecting the panels to an outside-solar-controller showed normal working:

1683019269832.png

Connecting other, outside panels to the system: no charging:

1683019828972.png

Honestly I am running out of possible solutions. Any ideas will be apprechiated !!


Gerhard



battery charging
1683018861203.png (430.5 KiB)
1683019008060.png (128.1 KiB)
1683019269832.png (124.1 KiB)
1683019450404.png (188.0 KiB)
1683019828972.png (78.8 KiB)
1683019909650.png (57.5 KiB)
6 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image klim8skeptic ♦ commented ·
@garry13 it looks like the fuse / breaker between the mppt and battery is faulty.


0 Likes 0 ·
garry13 avatar image garry13 klim8skeptic ♦ commented ·

Thanks for Your comment !

Where is this fuse ?

I can measure the normal battery voltage here:

1683021644914.png

Could this be the case, if a fuse between the mppt and the battery would be faulty??

Best wishes

Gerhard


0 Likes 0 ·
1683021644914.png (100.9 KiB)
Matthias Lange - DE avatar image Matthias Lange - DE ♦ garry13 commented ·

There is no fuse at the MPPT, but there should be a fuse somewhere between the MPPT and the battery.

Please make a screenshot of the history tab of the MPPT (Verlauf).

0 Likes 0 ·
Show more comments
klim8skeptic avatar image klim8skeptic ♦ garry13 commented ·

@garry13 I can measure the normal battery voltage here:

Not according to your overview screenshot. Batteries and shunt show 13.2xv, the mppt shows 13.49v (Or 14.19v).

Describe the devices between the mppt and battery.

How exactly does the BMS allow the 150-35 to charge?

0 Likes 0 ·
Show more comments
0 Answers