This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Is there possibility to enable L2 while inverting? I've read documentation and it states that L2 line is only enabled when onshore power is present.
I apologize, I am newbie. I have large bank and I want utilize both L1 and L2.
I assume there must be a configuration setting in VEConfig app.
Thanks
No this does not happen. Why would you want this output on? It has been designed to only power up when the external AC input is present, to reduce loading on batteries from water heaters, AC units etc. If you have loads like this you want to drive from battery, and the bank is large enough, they can be connected to the L1 output.
This is possible, I think. It’s a bit convoluted (as I see it). You have to use veconfigure, which requires windows and the mk3 usb dongle, then add an assistant, then use the virtual switch, then choose AC-out-2 relay. Then you have to send those settings. Can also be done via remote veconfigure with VRM if you have a GX device. When that is on then AC-out-2 is powered up even when off shore power and inverting.
This helped me: https://youtu.be/tJGP3G0P7no?si=8PvJ3bKb92qfDERz
This is what you need to enable the relay for AC-Out-2.
I will add to this answer that
I have large bank and I want utilize both L1 and L2.
make it sound suspiciously like Tom wants _extra power_ which is not how this works - it is 3kVA total, not per output.
