Please see screenshot. When I log into my online VRM display under the "Charging" window there is a temperature that has a value which is often significantly different from the "Battery" window which is bringing data in from my thermometer installed inside the Rolls battery cell. It appears the temperature voltage compensation being applied by my Victron system is using the value inside the "Charging" window. this value is obviously incorrect when I make temp measurements. I need to know the difference between these two temperature values reported by VRM, how to eliminate the incorrect "Charging" window value and how to be sure the temperature based voltage adjustments being made by the Victron System are correct. Thanks or any help you can offer