This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi good people,
I hav the Phoenix Inverter 24/2000. Not the smart version. I think it's called blue.
I got it as a gift, completely assembled. I would like to connect ESP32 to it But I'm simply not able to find out where the UART connector is.
Is that one of the RJ45 sockets?
Thanks in advance for your help.
Regards,
Radek .
That would help us helping you.
VE.Bus ?
Is this your Model # Inverter ?
Communications interface
These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control.
Yeah I read it too. But the inverter is in the basement and my computer is in the office in the second floor.
That would be a veeeery long USB cable. And even doesn't say where to connect it to. Also most microcontrollers do not have USB port in the traditional meaning.
What does the LABEL say, by this RJ-45 Socket?
