question

kr0815 avatar image
kr0815 asked

How to fake an AC-Charger and GenSet in Venus by MQTT?

I have a somehow special System

- MP2/3000 with LiFePO4 Cells - the regular thing

- Aditionally a Huawei Fast Charger / Booster because the max 32 Amps of the MP2 often are not enough

- Aditionally a Hoymiles 300W Inverter that runs from sunset till sunrise to feed the basic house consumption - better efficency than the MP2, and it was cheap


Now i want to integrate these 2 units in the Venus GUI

At the moment i fake already the readouts of the house consumption and the PV System with modified Scripts from Ralf Zimmermann by MQTT Messages - that works well


But how to integrate a DC-Charger and a GenSet for the additional units?


I think i need the right ProductId?

Victron says

/ProductId
As defined in products.h in velib.

I cant find this products.h?


Any suggestions?

Multiplus-II
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
stsl avatar image
stsl answered ·

I was wondering also and so I did some searching, couldn't find the file. Then I extracted the data from one of the binaries on my MultiPlus II GX. You can find the list here: https://gist.github.com/seidler2547/52f3e91cbcbf2fa257ae79371bb78588

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.