question

simonkeeligan avatar image
simonkeeligan asked

EV charger on single phase issue

Good morning, i have just fitted the Victron EV charger to a single phase installation L1 N E , updated it to firmware 1.25, when the car is not connected its is showing L3 power at 7360w even though L3 is not connected and when connected and charging shows power on L1. is there a setting for 3 phase ?i cant see it?

screenshot-2023-04-19-073033.png

thankyou for your reply

ev charging station
screenshot-2023-04-19-073033.png (48.5 KiB)
4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lucian Popescu (Victron Energy Staff) avatar image Lucian Popescu (Victron Energy Staff) ♦♦ commented ·
Hi, that might be an issue with the cables order, probably during production. If you are technical enough, probably you can fix it yourself. If not, you can return it or ask your dealer to have a look.

If you need some guidance to fix it yourself, you can contact me.

Sorry for this, and please keep me posted!


Lucian

lpopescu@victronenergy.com

0 Likes 0 ·
Show more comments
1 Answer
simonkeeligan avatar image
simonkeeligan answered ·

Issue was sorted after 2 hours big thanks to @Lucian Popescu (Victron Energy Staff) solution was he TeamViewer and changed some calibration settings. top man.

customer service is always spot on in my opinion.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.